Tires
Tires

Can Run-Flat Tires Be Repaired?

(Lea en español)

Most run-flat tires make a promise of temporary extended mobility at up to 50 miles per hour speeds for up to 50-mile distances in the event a puncture allows complete air pressure loss. However, even if driven within their speed and distance limitations, driving on run-flat tires with low or no air pressure can permanently damage their internal structure, surrendering strength and durability.

Therefore, Tire Rack recommends driving the slowest safe speed below 50 miles per hour and the shortest distance to a service provider's facility.

Unfortunately, when it's time to consider repair, even a trained tire specialist may be unable to confirm internal structure damage resulting from a run-flat tire having been driven in a severely underinflated or zero pressure condition. Such damage may not be visible on the surfaces of the tire's exterior sidewalls or interior liner, making it impossible to determine tire suitability for repair or reuse. Because of this, Tire Rack and many tire manufacturers recommend replacement of run-flat tires driven in a severely underinflated or zero pressure condition.

U.S. Tire Manufacturers Association (USTMA) Policies

The USTMA is an industry association whose membership includes most major domestic and foreign manufacturers selling tires in the United States. The USTMA collectively establishes the foundation of industry policies, from which the tire manufacturers can specify their company's exact position.

The USTMA makes available training presentations and workshop posters to assist tire technicians with the steps necessary to properly repair tires. Each tire manufacturer specifies USTMA tire repair procedures must be followed precisely to have any tire repair deemed proper.

While basic USTMA tire repair procedures remain the same for run-flat tires as non-run-flat tires, many tire manufacturers have issued specific policies that supersede USTMA's standard reparability policies.

Selected Tire Manufacturer's Policies for Run-Flat Tire Repair

The following list summarizes tire manufacturers' run-flat tire repair policies, however it should be noted that every tire manufacturer that consents to repair, does so only after the punctured tire has passed a thorough exterior and interior examination.

Manufacturer/Brand Repair Policy Additional Provisions
BFGoodrich Permitted 1 repair maximum
Bridgestone Permitted Only if 15 psi maintained
Continental Does not recommend Mfg. Road Hazard Program*
Dunlop Permitted 1 repair maximum for H- and greater speed ratings
Firestone Permitted Only if 15 psi maintained
Goodyear Permitted 1 repair maximum for H- and greater speed ratings
Hankook Permitted
Kumho Permitted
Michelin Permitted 1 repair maximum
Pirelli Not endorsed Mfg. Road Hazard Program**
Yokohama Not to be repaired if run-flat
*Replaced free of charge first year or first 2/32" of wear (whichever comes first). Continental advises that a repair to one of its tires invalidates all other manufacturer's warranties.
**Replaced free of charge first year or first 2/32" of wear (whichever comes first), then prorated until worn to 2/32" of remaining tread depth.

Tire manufacturers' policies for non run-flat tire repair can be found here: Flat Tire Repairs' Effect on Speed Rating

Use of run-flat tires deemed non-repairable may result in vehicle or property damage, as well as can cause personal injury or death.

Tire Rack will not repair any run-flat tires that have been driven in a severely underinflated or zero pressure condition because the service conditions they experienced and integrity of their internal structure cannot be confirmed.

YOU FOUND THIS POST HELPFUL.

490 of 1193 people found this post helpful

Recommended Posts

SERVICE WITH A SMILE

Need help choosing the right products for your vehicle? Our team of highly trained experts has the knowledge and passion to help. Just pick up the phone and give us a ring. Or let's chat via email. We love solving problems and lending a hand (or an ear).

Contact Us