Wheels
Wheels

How Do I Install Wheel Covers / Hub Caps?

(Lea en español)
  1. All wheel covers must have a metal ring with an indent. If the ring is missing or does not have an indent, call our customer service department toll free at 888-981-3953. We will replace it free of charge.
  2. The ring indent must be lined up with the valve stem stamp diagram that is located on the backside of the wheel cover. The valve stem on your wheel will fit inside this indent.
    See Figure 1.
  3. Check each ring insert to make certain that the indent is facing down and inward (away from you if you are looking at the backside of the wheel cover).
  4. Push the wheel cover onto the steel wheel, and once it feels secure, check again to make sure the indent and the tire valve stem are lined up.
  5. Test fit the wheel cover by trying to remove it with your hands. If the wheel cover can be easily removed, change the placement of the wire ring by pushing it down into the lower notch on the tabs. See Figure 2.

YOU DID NOT FIND THIS POST HELPFUL.

548 of 1201 people found this post helpful

Recommended Posts

SERVICE WITH A SMILE

Need help choosing the right products for your vehicle? Our team of highly trained experts has the knowledge and passion to help. Just pick up the phone and give us a ring. Or let's chat via email. We love solving problems and lending a hand (or an ear).

Contact Us