Ford Performance  Calibration Kit Bronco 2.7L Ecoboost

For drivers with a Bronco, this Performance Calibration kit can upgrade the power and performance of your vehicle’s 2.7L EcoBoost engine. The kit offers an optimized shift schedule for automatic transmission models. These smoother gear shifts improve transmission, torque, and throttle response across the RPM range without compromising drivability. Using this kit, increase your vehicle’s power up to 355hp at 5,500rpm and torque up to 433lb-ft. at 3,500rpm.

The Bronco 2.7L Performance Calibration kit includes the ProCal 4 delivery tool to enable the download and delivery of future calibrations. This kit also allows changes in tire size up to 37x12.5R17 or in the axle/FDU ratio up to 5.38.

Additional Kit Details:

• Premium fuel required
• CARB E.O. #: D-431-6 for 2021-2024 models
• Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module.
• Reverting to stock calibration with non-production tires/ gears will result in error codes and may cause critical systems to lose functionality.
• Calibration and ProCal 4 tool are VIN locked. Please contact the Ford Tech Line with additional questions.
• ProCal 4 software is only available for Windows 7 or greater and will not work with Windows 10 in “S Mode.”
• The ProCal 4 tool receives periodic firmware updates to improve usability and download additional features. Please periodically connect the tool to your PC to receive automatic updates.
• The calibration kit is approved for 50-state compliance.

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

 ADVERTENCIA: Cáncer y Daño Reproductivo - www.P65Warnings.ca.gov.